Delivery to any location within 50 miles of our store!

Brands

Newsletter

Subscribe to our newsletter for periodic updates and valuable coupons.

Email Address:
HTML   TEXT-Only

Testimonials

Great

This is just a test submission to show you how it looks, great, eh?
Read More ->



Decade self priming polyurethane



Call for Price

  • Model: Ell.DX-85xxx
  • 100 Units in Stock
  • Manufactured by: Ellis Paint



DECADE SELF-PRIMING URETHANE enamel is a two-component coating providing gloss, excellent durability and resistance properties, along with an extremely low VOC of less than 100 grams per liter, 0.8 pounds per gallon. DECADE SELF-PRIMING URETHANE is lead and chromate free. This breakthrough formula results in cutting production time saving hours of application time for each project.

Partial List of Uses: 
  • Concrete floors 
  • Machinery 
  • Oil refineries
  • Storage tanks 
  • Offshore platforms 
  • Piers
  • Structural steel 
  • Steel decks


Benefits: 
  • Exceptionally strong adhesion 
  • Long-term protection
  • Chemical resistance 
  • Exceptional resistance to chipping abrasion 
  • Easy mixing
  • Long term gloss

Directions for use:
SURFACE PREPARATION:
GENERAL:
All surfaces to be painted must be clean, dry and in fit condition to be painted. Be sure to remove all wax, silicone, oil, powdery or scaling rust, loose or peeling paint and all other foreign matter. Smooth, slick surfaces should be sanded to achieve adhesion.

BARE FERROUS METAL:
Clean off all dirt, grease, oil, wax or other foreign matter. All loose, powdery or scaling rust must also be removed. A completely de-rusted surface is recommended.

NON-FERROUS METALS:
Clean surface thoroughly, then apply a prep coat of Hy-Lux® 690 Low VOC Etching Filler as a first coat over the non-ferrous metal to insure adhesion. Topcoat the Hy-Lux® 690 Low VOC Etching Filler with Decade Self-Priming Urethane between 2 to 8 hours. After 8 hours, the Hy-Lux® 690 Low VOC Etching Filler should be lightly sanded before applying the first coat of DECADE Self-Priming Urethane.

PAINTED SURFACES:
Decade Self-Priming Urethane may lift old paint. We recommend a test patch. If lifting occurs, remove old paint and follow directions for bare ferrous metals. Be sure all loose and peeling paint is completely removed, and the surface is clean. Remove excess chalkiness with a wire brush or by sanding. MIXING: Be sure all spray painting equipment is clean and ready to use prior to mixing and application of coating. IMPORTANT! Decade Self-Priming Urethane DX-8500 Series must be mixed with DX-8599 Catalyst before the product can be used. Decade Self-Priming Urethane is a two-part product consisting of part DX-8500 Series and DX-8599 Catalyst. The proper mixing ratio is 4:1. Mix four parts of Decade Self-Priming Urethane DX-8500 Series with one part DX-8599 Catalyst. Stir thoroughly to a uniform mixture. Strain mixture prior to application. Mix no more material than will be used in a 2-hour period. Any mixture of DX-8500 Series and DX-8599 Catalyst will have the hazards of both components. Before opening the packages, READ ALL WARNINGS ON THE LABELS. OBSERVE ALL APPLICABLE PRECAUTIONS.

FILM PROPERTIES:
V.O.C. (Volatile Organic Compounds):100 grams per liter or less (0.8 lbs/gal)
ADHESION: ASTM D-3359 Cross-Hatch. 5B. - 100% adhesion FLEXIBILITY AND ELONGATION: ASTM D-522 1/8” Mandrel, no cracking
IMPACT RESISTANCE: ASTM D6905 50lbs/in.
MAR RESISTANCE: Excellent
PENCIL HARDNESS: ASTM D-3363 F - H
SALT SPRAYING: ASTM B117 1,000 hours, No rust on unscribed area.
ACCELERATED WEATHERING: ASTM G154 1000 hours UV313B lamps. 95% gloss retention


This product comes in Gloss,Black,White,Safty colors and deep tint base. Annex will color match colors.

For a complete product data sheet and MSDSs please contact us.

For Product delivery greater than 60 miles from the San Fernando Valley California please contact us for shipping information

Here are two short videos in the first you can see the product being applied to a small metal cart that was manufactured for a cabinet shop. In the second video you can see the applicator talking about the coating a few weeks after it was applied.





Copyright © 2018 Annex Paint and Lacquer
Powered byZen Cart|  Developed by:IDEAS Creative Group

SSL  Authorize.Net