Delivery to any location within 50 miles of our store!



Subscribe to our newsletter for periodic updates and valuable coupons.

Email Address:



This is just a test submission to show you how it looks, great, eh?

Centurion Water based Clear Grain filler

Starting at: $66.75

  • Model: CW-5001
  • 100 Units in Stock
  • Manufactured by: CIC Coatings

This is a single component water based past that is spread on with a spreader or putty knife and then sanded back. depending on the grain you may need two coates. It is best to let the product cure for an additional day beforetop coating as it does shrink somewhat. It can be top coated with a water based products or lacquer based products and is used when you want a full Grain fill smooth finish.

Recommended uses:
Interior/Exterior cabinets and panels and for sealing the end grain on MDF panels

 Spread the material in to the grain of the panel scrapping off all excess, allow the paste to fully dry and then sand it back to bare wood, this is not suspose to be a coating but a grain fill, if you are planning to stain the wood, you woud do that after you  have applied all the filler you are going to use and have sanded the substrate back to the wood. If you leave high spots your stain is not going to penitrate and will give ayou a blochie appearence. this is a labor intensive activity and is best used on large flat panels and doors.

Clean Up:
Water clean up. throughly rinse your tools of all material dirrrectly after the spreading is complete, the grain filler will harden on your tools and become very difficult to get off.

See the attached short back yard demonstration of the product.


For Product delivery greater than 60 miles from the San Fernando Valley California please contact us for shipping information

You can also visit our library of references and helpful tips at our wood finishing Blog at:

Please Choose:

Add to Cart:

Copyright © 2018 Annex Paint and Lacquer
Powered byZen Cart|  Developed by:IDEAS Creative Group

SSL  Authorize.Net